Bandsaw BS 430DG
Regular price:
Regular price:
product unavailable
add to wish listDescription
STILER BS430DG BELT CUTTER
In the model, we used a three-phase motor equipped with additional security, a new generation maintenance-free hydraulic cylinder, liquid cooling in a closed system with a large drain pan.
The main advantages of the machine are: The arm can be turned up to 60º to the right or up to 45º to the left, a new generation hydraulic cylinder, a more powerful 1.5 kW engine, more efficient cooling system.
In addition, the guides are equipped with sintered carbides, which translates into greater accuracy during serial cuts.
Technical data
Ø max .: 260 mm
H x B max .: 260 x 430 mm
Cutting band size: 3660x0.9x27 mm
Power supply: 3 phases 400V 1.5 kW
Reg. arm drop: Hydraulic cylinder
Belt linear speed: 24, 52, 78, 109 m / min
Swivel arm right: up to 60º (right), up to 45º (left)
The height of the vice base: 68 cm
Machine dimensions: 1900 x 1250 x 1100 mm
Weight: 550 kg
Set:
Complete machine
Cutting tape
Coolant concentrate
User manual
CE certificate
Specification:
The massive, stable and refined structure and the arm made of massive welded steel sheets provide the machine with very high rigidity and stability during cutting, which ensures precision cutting and long trouble-free operation. The construction and the use of a 27 mm wide cutting band allows for the full performance of multi-series cuts of both profiles and full details.
The belt guides are equipped with special carbide inserts and bearings. This has a huge impact on the belt guiding, its service life, straightness, accuracy and quality of the cut.
The cutter is equipped with a modern material clamping system with a quick lock.
The cutting speed is regulated by a hydraulic cylinder.
The machine is equipped with a powerful cooling pump with a large tank.
The arm's speed is regulated on the cutting machine's control panel.
The belt speed is regulated by changing the belt position on the pulleys. We can choose from four speeds of the cutting band: 24, 52, 78, 109 m / min.
In the lower position of the arm (after cutting the material), the saw band drive and the cooling system are automatically turned off.
Safety is ensured by the cutting band covers and micro switches that stop the engine operation after the cutting cycle is completed or any of the covers are opened.
The engine is equipped with new generation thermal fuses.
The base is built as a rigid body welded from steel sheets. Inside there is a separate coolant tank with an electropump and a large drain pan.
The design of the upper part of the base provides a basin for draining the coolant and catching the chips produced during the cutting of the material.
A STEEL structure with a rotating arm and a control panel on a separate pedestal is attached to the base.
In the cutting process, the main cutting movement is the movement of the cutting band and the movement of the arm descending.
The speed of the arm drop (cutting speed) is regulated by a hydraulic actuator.
The drive from the engine to the belt driving pulley is transferred by means of a maintenance-free worm and belt transmission.
The drop speed of the arm and the activation of the coolant system can be easily adjusted on the control panel.
The control panel is located on a rotating arm and can be rotated up to 180 °.
The arm can be rotated in two directions. Left to 45 ° and right to 60 °.
The cutter has an adjustable vice.
The machine is equipped with a simple quick pressure system.
The guides are equipped with guide bearings and sintered carbide plates. Such a solution guarantees high precision of cutting even with full materials. The coolant is directed directly onto the belt from the guide.
The arm has a number of adjustable stops that facilitate the quick change of the cutting angle without the need for precise measurements.
The arm falls down by means of a hydraulic cylinder. The falling speed can be conveniently changed on the control panel.
There is a coolant tank in the base. The coolant is transferred directly to the guides by a pump.
Cutting range:
Angle 0°:
- Rura - ø260 mm
- Profil - 430 x 260 mm
Angle 45°(Right):
- Rura - ø260 mm
- Profil - 300 x 200 mm
Angle 45°(Left):
- Rura - ø260 mm
- Profil - 260 x 130 mm
Angle 60° (Left):
- Rura - ø155 mm
- Profil - 125 x 125 mm