TABLE EDGEBANDER STILER EB120 + 1kg kleju (1)
product unavailableadd to wish list
Stationary edgebander STILER EB120
The newest model of the STILER stationary table top edge bander.
It is perfect for covering worktops up to 60 mm high and automatic milling of worktops up to 45 mm high.
The edgebander is equipped with automatic application of glue on the table top and veneer. Additionally, the machine has two milling machines for milling the top and bottom edges of the table top.
The machine is also equipped with two pneumatic veneer cutters (a compressor must be connected to power them).
THE EDGEBANDER IS EQUIPPED WITH AUTO FEED OF THE WORKED TOP
- Total power requirement: 3.2 kW
- Power supply: 230V
- Taping height: 7 - 60 mm
- Milling height: 7 - 45 mm
- Tape thickness: 0.3-3 mm
- Heating speed: 5 - 10 minutes
- Banding speed: 0-6 m / min
- Glue tank capacity: 1000 ml
- Milling shank: 1/4 "
- Dimensions: 850 x 500 x 450 mm
- Weight: 80 kg
- Complete machine
- 2 cutters with bearing
- 1 kg of glue
The machine is equipped with automatic veneer collection and automatic cutting it to the appropriate length of the table top.
The veneer pickup rollers are activated when the glue reaches the right temperature.
The control panel includes:
- main switch
- switch for milling machines
- smooth regulation of the top peeling speed
- electronic glue temperature indicator
- smooth regulation of the veneer feeding speed
In the edgebander there are two pneumatic veneer cutters, a compressor with a power of about 8 BAR is necessary to power them.
The cutters are activated by foot switches and limit switches when feeding the table top.
Inclinedly positioned pressure rollers support even table top guidance and prevent the top from receding.
The rollers are pressure-adjustable.
The worktop also has an auto-feed of the processed material .
The feed speed is regulated by a potentiometer on the control panel.
Edge milling machines mill both the top and bottom edge of the table top.
The set includes 2 cutters with bearings
The machine also has the option of polishing the milled edge .
The additional veneer arm is a great help .
The shield is mounted on a bearing.
The machine also has the option of wrapping irregularly shaped table tops . For such wrapping, move the glue feeding head to the side position.
The edgebander is equipped with a blow to clean the working field during milling.
The worktop has slides and support rollers for easier material movement during work.
The support rollers have the option of sliding out, which allows for gluing larger dimensions.