Wood chipper STILER BX 62R with pump

Availability: High quantity
Dispatched within: 24 hours
Gross price: €4,162.56 4162.56
Net price: €3,384.19
quantity szt.

product unavailable

add to wish list


The STILER BX62R disc chipper is used for shredding tree limbs and trunks with a diameter of up to 15 cm, and with suckers up to 30 cm.

Newer rugged model.

4 knives sharpened on both sides ensure very high efficiency and durability of the machine. The blades are made of hard tool steel. The machine has 1 counter blade.

The back of the disc is equipped with breakers and ejection shovels for more effective ejection of the wood chips from the machine



The machine has two hydraulic feed rollers. They speed up the work and make it easier to feed the branches onto the shield. In addition, the machine has 10 feeding speeds and a reverse gear to withdraw the branches.

The revolutions are transmitted through the power take-off shaft which connects the machine directly to the tractor shaft. The minimum required shaft revolutions is 540 rpm.

The machine is equipped with a three-point linkage.

360 ° rotating ejection of wood chips allows us to direct the stream in any direction.


The material collecting system consists of two hydraulically driven toothed shafts.
The material pickup mechanism has a 10-step pickup speed regulator and a material dispensing function.
The drive of the hydraulic system comes from the built-in hydraulic pump.
The chipper has a massive disc with a diameter of 740 mm and a thickness of 25 mm.
There are 4 cutting knives, sharpened on both sides, with dimensions of 240 mm x 60 mm on the disc.
Additionally, there is a counter-knife mounted on the shield.
The design of the rotor allows for long-term operation without a load on the tractor.
All bearings protected against the ingress of dust, crust, etc., are lubricated by easily accessible calipers.
There are also breakers (shovels) on the disc, shredding the obtained framework to a value of 20-50 mm.
The chipper with a three-point linkage (TUZ) is designed to work with a farm tractor with a minimum power of 30 km.
The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is sheared in the event of too much load on the machine and disconnects the direct drive.
The chipper is additionally equipped with disc ventilation.
The set also includes a PTO shaft and an extension funnel
The produced chips are thrown through a tube rotated by 360 ° in relation to the base of the chipper.
The obtained wood chips have dimensions from 20 mm to 60 mm.

Technical data:
  • Model: BX62R
  • The size of the shredded material: 15 cm in diameter (maximum 30 cm with roots)
  • Drive system: Drive from the tractor engine transmitted by the PTO
  • Minimum tractor power: 30 HP
  • Rotor size: 76 cm
  • Number of cutting knives: 4 + 1 Counter blade
  • Knife type: Hardened CR12 tool steel
  • Rotor weight: 79 kg
  • Material feeding mechanism: Built-in hydraulic system - 2 rollers
  • Mounting system: Three-point linkage (three-point linkage)
  • Dimensions (with folded hopper): 127 cm L x 132 cm W x 188 cm H
  • Hopper: 63 x 63 cm
  • Rotation range of the ejection tube: 360 °
  • The height of the ejection tube: 188 cm
  • Rated revolutions per minute / Rated revolutions: 540-1000
  • Chipper weight: 510 kg 
Filmy poglądowe
Shop is in view mode
View full version of the site
Sklep internetowy Shoper Premium