792 750 200
Wood chipper STILER TP 250
Description
The STILER TP 250 disc chipper is designed for shredding tree limbs and trunks with a diameter of up to 30 cm.
Newer rugged model.
EQUIPPED WITH A NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!!
4 knives sharpened on both sides ensure very high efficiency and durability of the machine. The blades are made of hard tool steel. The machine has 1 counter blade.
The back of the disc is equipped with breakers and ejection shovels for more effective ejection of the wood chips from the machine
The machine has two hydraulic feed rollers. They speed up the work and make it easier to feed the branches onto the shield. In addition, the machine has 10 feeding speeds and a reverse gear to withdraw the branches.
For better efficiency, the feed rollers are equipped with steel tines.
The revolutions are transmitted through the power take-off shaft which connects the machine directly to the tractor shaft. The minimum required shaft speed is 540 rpm.
The machine is equipped with a three-point linkage.
360 ° rotating ejection of wood chips allows us to direct the stream in any direction.
The 37.5 cm long knife easily shreds branches up to 30 cm in diameter.
Specification:
- The material collecting system consists of two hydraulically driven toothed shafts .
- The material pick-up mechanism has a 10-stage pick-up speed regulator and a material dispensing function.
- The drive of the hydraulic system comes from the tractor's hydraulic outlets (fastened with quick couplers)
- The chipper has a massive disc with a diameter of 1080 mm
- The disc has 4 cutting knives, double-sharpened, 375 mm long
- In addition, there is a counter-knife mounted on the blade guard .
- The design of the rotor allows for long-term operation without a load on the tractor .
- All bearings protected against the ingress of dust, crust, etc., are lubricated by easily accessible calipers.
- There are also breakers (shovels) on the disc, shredding the obtained framework to a value of 20-60 mm.
- The chipper with a three-point linkage (TUZ) is designed for cooperation with a farm tractor with a minimum power of 90 km .
- The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is sheared in the event of too much load on the machine and disconnects the direct drive.
- The chipper is additionally equipped with disc ventilation.
- The set also includes a PTO shaft
- The produced chips are thrown through a tube rotated by 360 ° in relation to the base of the chipper.
- The obtained wood chips have dimensions from 20 mm to 60 mm
|
Model: |
TP250 |
|
The size of the shredded material: |
30cm in diameter |
|
Drive system: |
The drive from the tractor engine is transmitted by the PTO |
|
Minimum tractor power: |
90 KM |
|
Rotor Size: |
108 cm |
|
Number of cutting knives: |
4 + 1 Counterblade |
|
Knife type: |
Hardened CR12 tool steel |
|
Rotor weight: |
180 kg |
|
Material feeding mechanism: |
Tractor's hydraulic drive - 2 toothed shafts |
|
Fastening system: |
Three-point linkage (three-point linkage) |
|
Dimensions (with folded hopper): |
178 cm L x 168 cm W x 239 cm H |
|
Batch hopper: |
63 x 63 cm |
|
Rotation range of the ejection tube: |
360 ° |
|
The height of the ejection tube: |
239cm |
|
Rated revolutions per minute / Rated revolutions: |
540-1000 |
|
Chipper weight: |
866 kg |
