792 750 200
Tractor stump grinder SG24 PRO
Description
A new model of the STILER SG 24 stump grinder .
This model is driven by a PTO connected to a tractor.
The model of the stretcher is equipped with a larger number of teeth on both sides, which makes it possible to work left - right. This solution makes the work even faster and more enjoyable.
Included:
- Complete stump grinder
- PTO power take off
Specification:
- The machine is designed for milling trunks of felled trees.
- It is equipped with a three-point linkage .
- Power is supplied through the power take-off shaft ( PTO ), and the side and vertical movement is controlled by the tractor's hydraulic system through two powerful actuators .
- The machine's range of motion is 40 ° (20 ° Left and Right ).
- The machine disc is equipped with steel knives with a carbide plate .
The machine is driven by the tractor's PTO. Two hydraulic cylinders driven from the tractor pump control the machine right, left and up and down.
The toothed finish on the support frame provides greater stability during operation.
The machine has carbide teeth, thanks to which they are much more durable and more effective when working with a really hard wood.
|
Model |
SG24-PRO |
|
|
Recommended engine power |
30 - 50 hp |
|
|
Rotor diameter |
61 cm |
|
|
Number of teeth |
54, double-sided milling |
|
|
Tooth structure |
Steel with a carbide tip |
|
|
Roller speed required |
540 rpm |
|
|
Blade speed |
950 rpm |
|
|
Cutting height |
45 cm above the ground |
|
|
Cutting depth |
20 cm below ground level |
|
|
Maximum cutting depth in one pass |
15 cm |
|
|
Maximum horizontal cut range |
66 cm |
|
|
Arm movement range |
40 ° |
|
|
Hitch category |
Corner. I or II (TUZ) |
|
|
Libra |
280 kg |
|
