792 750 200
Wood chipper STILER BX 42
Description
4 cutting knives (sharpened on both sides) provide efficient work of machine. Blades are made of hardened tool steel. Additionally machine have one counter knife mounted on housing of rotor.
Back of rotor is equipped with special shovels which are helping in effective discharging of wood chips from machine. Furthermore twig breakers is installed inside rotor housing
Obroty przekazywane są po przez wałek odbioru mocy którym łączymy maszynę bezpośrednio z wałem ciągnika. Minimalne wymagane obroty wała to 540 obr./min.
Wood chipper is designed to work in connection with tractor. Machine has three point hitch and is powered by tractor through PTO shaft (min. 540 rpm/minute).
Discharge chute can be rotated by 360°
Thanks to installed coupling ball you can attach light trailer to wood chipper.
Specification:
- Wood chipper Stiler BX42 is designed to chipping tree branches and stems up to 10cm diameter.
- Atteched to tractor through three point hitch
- Designed to work in conjunction wiyh tractors having minimum power of 18 HP.
- The chipper with a three-point linkage (TUZ) is designed to work with a farm tractor with a minimum power of 18 HP .
- The drive is transmitted through the PTO shaft of the tractor. The produced chips are thrown through a tube rotated by 360 ° in relation to the base of the chipper.
- Massive shield equipped with 4 knives sharpened on both sides + one counter knife.
- Additionally, our disc is equipped with breakers (shovels), which additionally shred the obtained framework to a value of 20-60 mm.
- The chipper is additionally equipped with disc ventilation.
- The hopper can be folded up for transport.
- All bearings are protected against the ingress of dust, scales, etc.
- The set includes all hooks, pins, etc. - you buy a machine ready for work!
- The design of the rotor allows for long-term operation without a load on the tractor.
|
Model: |
BX42 |
|
The size of the shredded material: |
10cm in diameter (maximum 25cm with roots) |
|
Drive system: |
The drive from the tractor engine is transmitted by the PTO |
|
Minimum tractor power: |
18 KM |
|
Rotor Size: |
63cm |
|
Number of cutting knives: |
4 + 1 Counterblade |
|
Knife type: |
Hardened CR12 tool steel |
|
Rotor weight: |
43 kg |
|
Material feeding mechanism: |
Manual operation |
|
Fastening system: |
Three-point linkage (three-point linkage) |
|
Dimensions (with folded hopper): |
101cm L x 106cm W x 152cm H |
|
Batch hopper: |
50 x 50cm |
|
Rotation range of the ejection tube: |
360 ° |
|
The height of the ejection tube: |
152cm |
|
Rated revolutions per minute / Rated revolutions: |
540-1000 |
|
Chipper weight: |
230 kg |
