Wood chipper STILER BX 42R with pump

Availability: High quantity
Dispatched within: 24 hours
Gross price: €3,232.33 3232.33
Net price: €2,627.91
quantity szt.

product unavailable

add to wish list

Description

The STILER BX42R disc chipper  is used for shredding tree limbs and trunks with a diameter of up to 10 cm , and with suckers up to 25 cm .

Newer rugged model.

4 knives sharpened on both sides ensure very high efficiency and durability of the machine. The blades are made of hard tool steel. The machine has 1 counter blade.

EQUIPPED WITH A NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS.

THE CHIPPER IS BUILT IN A HYDRAULIC SYSTEM - PUMP AND OIL TANK.

 

The back of the disc is equipped with breakers and ejection shovels for more effective ejection of the wood chips from the machine

The machine has two hydraulic feed rollers. They speed up the work and make it easier to feed the branches onto the shield. In addition, the machine has 10 feeding speeds and a reverse gear to withdraw the branches.

The revolutions are transmitted through the power take-off shaft which connects the machine directly to the tractor shaft. The minimum required shaft speed is 540 rpm.

The machine is equipped with a three-point linkage.

360 ° rotating ejection of wood chips allows us to direct the stream in any direction.

Specification:

  • The material collecting system consists of two hydraulically driven toothed shafts .
  • The material pick-up mechanism has a 10-stage pick-up speed regulator and a material dispensing function.
  • The drive of the hydraulic system comes from the built-in hydraulic pump .
  • The chipper has a massive disc with a diameter of 610 mm and a thickness of 18 mm .
  • There are 4 cutting knives, sharpened on both sides, with dimensions of 210 mm x 60 mm on the disc .
  • Additionally, there is a counter-knife mounted on the shield .
  • The design of the rotor allows for long-term operation without a load on the tractor .
  • All bearings protected against the ingress of dust, crust, etc., are lubricated by easily accessible calipers.
  • There are also breakers (shovels) on the disc, shredding   the obtained framework to a value of 20-50 mm.
  • The chipper with a three-point linkage (TUZ) is designed to work with a farm tractor with a minimum power of 18 km .
  • The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is sheared in the event of too much load on the machine and disconnects the direct drive.
  • The chipper is additionally equipped with disc ventilation.
  • The set also includes a PTO shaft and an extension funnel.
  • The produced chips are thrown through a tube rotated by 360 ° in relation to the base of the chipper.
  • The obtained wood chips have dimensions from 20 mm to 60 mm.
 
Technical data

Model:

BX42R

The size of the shredded material:

10cm in diameter (maximum 25cm with roots)

Drive system:

The drive from the tractor engine is transmitted by the PTO

Minimum tractor power:

18 KM

Rotor Size:

63cm

Number of cutting knives:

4 + 1 Counterblade

Knife type:

Hardened CR12 tool steel

Rotor weight:

43 kg

Material feeding mechanism:

Built-in pump and oil tank + 2 feed rollers

Fastening system:

Three-point linkage (three-point linkage)

Dimensions (with folded hopper):

101cm L x 106cm W x 152cm H

Batch hopper:

50 x 50cm

Rotation range of the ejection tube:

360 °

The height of the ejection tube:

152cm

Rated revolutions per minute / Rated revolutions:

540-1000

Chipper weight:

385 kg

 
up
Shop is in view mode
View full version of the site
Sklep internetowy Shoper Premium