Wood chipper STILER BX 72R with pump

Specification:

• Disc chipper bx72r is used for shredding tree branches and trunks with a diameter of up to 17 cm. while with outgrowths up to 30 cm.
• The chipper with a three-point linkage is designed to work with a farm tractor with a minimum power of 50 km.
• It has a feed hopper equipped with a hydraulic self-collecting mechanism , consisting of two feeding rollers, drawing the material into the chipper's cutting chamber, driven by high-power hydraulic motors.
• The material pick-up mechanism has a smooth 10-stage pick-up speed regulator , a material dispensing function and an emergency stop.
• The drive of the hydraulic system comes from the pump and the hydraulic tank with which the chipper is equipped.
• The drive is transmitted through the PTO shaft from the tractor's PTO.
• The produced chips are thrown through a tube rotated 360 ° in relation to the base of the chipper.
• The massive cutting disc of the chipper is equipped with 4 knives, sharpened on both sides + one counter knife mounted in the base of the chipper.
• Additionally, the chipper disc is equipped with breakers (shovels) shredding the obtained framework to a value of 20-60 mm.
• The stiler bx 72r chipper is equipped with a massive cutting disc with a diameter of 750 mm and a thickness of 27 mm , the weight of the disc is 84 kg. As a result, unlike drum and roller chippers, disc chippers do not load the engine to a large extent, because the cutting resistance is overcome by the rotational force of the cutting disc.
• The chipper also has a disc locking latch , which makes it easy to replace the knives .
• Equipped with a safety pin, which is cut when the machine is too heavily loaded and disconnects the direct drive.
• The chipper is equipped with disc ventilation.
• It has a blockade of continuous operation , feeding mode, neutral and withdrawal of material from the throat.
• All bearings protected against the ingress of dust, crust, etc., are lubricated with easily accessible calipers.
• Below is a photo of the chipper in the transport position - thanks to the folding hopper, it is possible to quickly and easily change the dimensions, which will save space during transport.
• The set includes all hooks, pins, etc. - you are buying a machine prepared to work with the Polish clear instructions and valid certificates allowing it to work in the EU!
• The size of the resulting stroma is 20-60 mm