792 750 200
Wood chipper STILER FD-TM
Description
The STILER FD - TM disc chipper is reliable, very strong, equipped with rollers feeding the material to the disc.
The self-collection mechanism consists of 2 rollers, one driving and the other supporting.
The machine is designed for shredding branches up to a diameter of 16 cm (up to 30 cm with roots)
The minimum required tractor power is 20 horsepower. The drive is transmitted via the PTO shaft (included in the set).
The disc has 2 cutting knives and one counter knife. The knives are made of tool steel, which ensures long life and durability. Easy access to the knives makes the replacement easy and quick.
Mechanically driven feed roller. Makes it easier for the machine to shred branchy branches. The machine itself pulls the material onto the disc.
The discharge hopper has an adjustable 360 ° rotation . Thanks to that, we can direct the stream of wood chips in any direction without any problems.
The machine is also versatile thanks to the adjustable legs, thanks to which the machine fits almost all tractors available on the market.
The chipper is equipped with a 3-point linkage (three-point linkage) . That is a standard applicable to all tractors available on the market.
The obtained chips have a size of 20-30 mm .
Characteristic:
- Its design uses high-quality knives that can be replaced from the side of the machine by one person in just 10 minutes thanks to the easy-access panels.
- The strength of our machines is demonstrated by the use of solidly made steel sheet.
- The chipper is equipped with a pulling shaft with teeth made of high carbon steel. The advantage of this type of roller is that it aggressively grips any branch up to 16cm thick with or without leaves.
- The chipper has three MASSIVE high-strength bearings on which the main shaft is mounted and reinforced, wide, drive V-belts.
- Adjustable legs allow the chipper to be connected to a wider range of tractors. This innovation makes it easier to achieve the recommended PTO angle (less than 15 degrees) on larger tractors.
- The top handle is used to manually assist in picking up extra thick branches.
- The lower safety catch cuts off the shaft drive.
- Clear vinyl divider protects the user from chip dispersion, letting you see what's going on in the tray.
|
Model: |
FD-TM |
|
The size of the shredded material: |
16 cm in diameter (maximum 30 cm with roots) |
|
Drive system: |
The drive from the tractor engine is transmitted by the PTO |
|
Minimum tractor power: |
20 KM |
|
Rotor Size: |
660 mm |
|
Rotor Thickness: |
25 mm |
|
Rotor weight: |
98 kg |
|
Number of cutting knives: |
2 + 1 Counterblade |
|
Knife type: |
Hardened CR12 tool steel |
|
Material feeding mechanism: |
Mechanically driven feed-in shaft |
|
Fastening system: |
Three-point linkage (three-point linkage) |
|
Dimensions: |
140 cm L x 120 cm W x 182 cm H |
|
Batch hopper: |
50 x 50cm |
|
Rotation range of the ejection tube: |
360 ° |
|
The height of the ejection tube: |
182cm |
|
Rated revolutions per minute / Rated revolutions: |
540-720 |
|
Chipper weight: |
450 kg |
